.png)
Cleaning your Kuuma Grill
Cleaning and maintaining your Kuuma grill is the best way to ensure that your grill last long and provides you the performance that you expect from a boat or camping BBQ.
Stainless Steel exposed to high heat will change color over time. Discoloration of components does not affect the operation or performance of the BBQ grill. The exterior of the Kuuma BBQ can be cleaned with soapy water. We recommend covering the Kuuma grill between uses. Clean the grease from the Grease Tray on a regular basis. Lining this tray with tin foil is a great idea and will make clean up easy. It will also extend the life of your Kuuma Products grill! Clean the heat plate on a regular basis. Build up of grease and food particles can cause flare-ups or poor heat disbursement.
DO NOT LEAVE A HYBRID AND ELECTRIC MODELS MOUNTED WHERE IT CAN BE EXPOSED TO WATER / MOISTURE / RAIN. THIS WILL DAMAGE THE UNIT.
Maintenance for Kuuma BBQs
The following procedure will allow for the removal of the Kuuma Burner Tube and Regulator for cleaning or replacement.
Burner
The burner can be removed from the Kuuma Barbecue by removing the machine screw connecting the burner to the left side of the barbecue and sliding it out.
Regulator
1. Remove the barbecue’s burner, described above.
2. The orifice is located at the entrance to the burner. It is a brass fitting with a fine
hole that controls the maximum amount of gas to enter the burner.
3. Remove the orifice from the barbecue using an 11/16” (17mm) wrench.
4. Do not lose the spring washer that goes between the orifice and the regulator
housing. Observe the orientation of this washer for proper re-installation.